With hot strip steel as raw material, it can automatically produce angle iron flange required for duct, complete the bolt hole and rivet hole on the flange, it also can complete the duct angle iron hanger. During production, only need to input the size and quantity of the duct. The shift output is more than 1000 meters which greatly improves the efficiency and accuracy, reduces the waste of materials.
1. One synchronous tightening de-coiler (maximum bearing capacity: 1.5 tons);
2. One leveling and punching feeding device;
3. One set of angle iron roll forming and CNC cutting to length;
4. A CNC system.
NO. |
Model |
Thickness
|
Angle |
Production |
Power |
Dimensions |
Weight |
3028
|
JTF-4 | 2.5-5.0 | 30/40 | 2.5 | 22.8 | 2500 x1000 x 1500 | 7000 |
---|---|---|---|---|---|---|---|
The equipment appearance, configuration and technical parameters are for reference only, the actual products shall prevail.
|